Effect of polyethylene glycol on corrosion of fresh macroporous silicon in 1.0 M NaOH and application in determination of porosity and thickness by gravimetric measurement

Abstract

This work presents on improvement in gravimetric measurement for determining the porosity and thickness of microporous silicon. Herein, the corrosion of fresh macroporous silicon (f-MPSi) in 1.0?M NaOH with different concentrations of polyethylene glycol (PEG 200/400/600) was studied by weight loss measurement and scanning electron microscopy (SEM). The results showed that the corrosion rate decreased with increasing polyethylene glycol concentration, and increased with an increase in temperature. Polyethylene glycol can inhibit the corrosion of f-MPSi in NaOH solution. Moreover, 1.0?M NaOH/PEG 600 (10%) can be used as the optimized solution to remove f-MPSi for measuring its porosity and thickness by gravimetric measurement.     

Modification of bidentate bis(N-heterocyclic imine) ligands for low-valent main group complexes

The synthesis of modified neutral bis-NHI (NHI is N-heterocyclic imine) ligands and their application for the stabilization of tetryliumylidenes are reported. The ligands’ scaffolding consists of either saturated or methylated imidazoline backbones, and the bridge alternated from flexible ethylene to more rigid o-phenylene. Transmetalation reactivity of the cationic Sn^II compounds was tested towards LiAlH₄ and IDipp→SiCl₂ [IDipp is 1,3-bis(2,6-diisopropyl- phenyl)imidazol-2-ylidene] affording the respective aluminium and silicon complexes.     

3d过渡金属掺杂M_2@Si_(20)(M=Sc-Zn)团簇的密度泛函理论研究

利用密度泛函理论(DFT)研究3d过渡金属掺杂硅团簇的几何结构和稳定性,计算了绝热电子亲和能和垂直电离能,内嵌双金属间距,自旋磁矩等.结果表明内嵌的Sc、Ti、V、Mn金属二聚体和十二面体硅笼构成了稳定的富勒烯结构,随着d电子数目的增加其内嵌的富勒烯构型有部分畸变,总体而言Si_(20)团簇掺杂双金属后稳定性得到了提高.     

Quantitative characterization of holographic displays based on liquid-crystal-on-silicon spatial light modulator

This report discusses the effect of speckle size on the quality of holographic images based on a liquid-crystal-on-silicon (LCoS) spatial light modulator (SLM). Further, it proposes methods of quantifying the average speckle size and holographic image resolution. These methods enable both characteristics to be compared using the same unit (the number of pixels in the holographic image), providing an intuitive and effective comparative analysis method. In particular, by varying the LCoS resolution ratio, the change in the resolvable minimum pixels of the holographic image is interpreted in conjunction with the average speckle size; moreover, an analysis of the correlation between the latter two is presented. This approach, based on LCoS resolution division, could provide useful insights into single-SLM-based, full-color holographic displays using space division. Furthermore, it could be extended to other components, including more advanced LCoS SLMs, and used to identify the relative effects on image quality with speckles.     

X射线荧光光谱法测定重整铂催化剂中氯

建立重整铂催化剂中氯的X射线荧光光谱测定方法。通过研磨机将铂催化剂研磨至粒径小于75 μm的颗粒,采用仪器压片制样,通过测量不同氯含量样品的计数率,建立铂催化剂中氯含量与计数率的线性关系。氯的质量分数在0.85%~1.04%范围内与计数率成良好的线性关系,相关系数为0.9995,检出限为0.0076%。样品加标回收率为96.2%~104.2%,测定结果的相对标准偏差小于2%(n=6)。该法测定结果与电位滴定法相吻合。该方法精密度高,分析速度快,满足重整装置生产调整的要求。     

Synthesis,characterization, and thermal properties of novel silicon 1,1,3,3-tetramethylguanidinate derivatives and use as single-source chemical vapor deposition precursors

A series of chemical vapor deposition (CVD) precursors have been synthesized by a single-step reaction of 1,1,3,3-tetramethylguanidine and a variety of silicon chlorides. The structures of the 1,1,3,3-tetramethylguanidinate-based compounds were verified by ¹H NMR, ¹³C NMR, XPS, EI-MS, and elemental analysis. The thermal stability, transport behavior, and vapor pressures of these compounds were evaluated by simultaneous thermal analyses (STA). These compounds are highly stable and those in liquid form are very volatile. Silicon carbonitride (SiCN) thin films were prepared by using bis (tetramethylguanidine)-dimethyl-silane as the precursor in helicon wave plasma chemical vapor deposition (HWP-CVD). The properties of the films were investigated by SEM, AFM, and XPS. The results showed that the films have good uniformities, low friction coefficient, and high hardness, enabling the films for fabrication of semiconductor devices.     

Modeling of the elementary gas-phase reaction during chemical vapor deposition of silicon carbide from CH3SiCl3/H2

We established a gas-phase, elementary reaction model for chemical vapor deposition of silicon carbide from methyltrichlorosilane (MTS) and H₂, based on the model developed at Iowa State University (ISU). The ISU model did not reproduce our experimental results, decomposition behavior of MTS in the gas phase in an environment with H₂. Therefore, we made several modifications to the ISU model. Of the reactions included in existing models, 236 were lacking in the ISU model, and thus were added to the model. In addition, we modified the rate constants of the unimolecular reactions and the recombination reactions, which were treated as a high-pressure limit in the ISU model, into pressure-dependent rate expressions based on the previous reports (to yield the ISU+ model), for example, H₂(+M) → H + H(+M), but decomposition behavior remained poorly reproducible. To incorporate the pressure dependencies of unimolecular decomposition rate constants, and to increase the accuracies of these constants, we recalculated the rate constants of five unimolecular decomposition reactions of MTS using the Rice-Ramsperger-Kassel-Marcus method at the CBS-QB3 level. These chemistries were added to the ISU+ model to yield the UT2014 model. The UT2014 model reproduced overall MTS decomposition. From the results of our model, we confirmed that MTS mainly decomposes into CH₃ and SiCl₃ at the temperature around 1000°C as reported in the several studies.     

Synthesis of (Z)-β-(Carbonylamino)alkenylindium through Regioselective anti-Carboindation of Ynamides and Its Transformation to Multisubstituted Enamides

The regioselective anti-carboindation of ynamides by using InBr₃ and silylated nucleophiles was developed to synthesize (Z)-β-(carbonylamino)alkenylindiums. The X-ray crystallographic analysis of an alkenylindium suggested that the reaction proceeded in an anti-addition fashion. In contrast to reported syn-carbometalations of ynamides by using organometallics, a cooperation of InBr₃ and silylated nucleophiles to ynamides achieved an anti-addition, which was supported by DFT calculations. The scope of substrates included various ynamides and silylated nucleophiles, such as silyl ketene acetals and silyl ketene imines. The transformation of synthesized alkenylindiums by iodination, radical coupling, and Pd-catalyzed cross-coupling successfully afforded trisubstituted enamines with high regio- and stereoselectivities.     

Dual Emission from Precious Metal-Free Luminophores Consisting of C,H, O,Si, and S/P at Room Temperature

Fluorescence–phosphorescence dual-emissive compounds are valuable tools for ratiometric luminescence sensing. Herein, it is reported that 2,5-bis(phenylsulfonyl)- and 2,5-bis[bis(4-methoxyphenyl)phosphinyl]-1,4-disiloxybenzenes exhibit dual emission with emission peaks that were easily identified without performing time-gated measurement. The disiloxybenzenes in powder simultaneously fluoresced and phosphoresced at 358–374 and 457–470 nm, respectively, under vacuum. The intensity ratios of the phosphorescence/fluorescence maxima of the disiloxybenzenes in powder and in a thin film of poly(methyl methacrylate) were sensitive to temperature and molecular oxygen, respectively. The plots of the relative intensity versus temperature or partial pressure of molecular oxygen were well fitted with calibration curves defined by an exponential approximation with excellent correlation coefficients R² (0.9708–0.9921), demonstrating the high potential of the disiloxybenzenes as precious metal-free probes applicable to ratiometric luminescence sensing.     

Directed Gas Phase Formation of Silene (H2SiCH2)

The silene molecule (H₂SiCH₂; X¹A₁) has been synthesized under single collision conditions via the bimolecular gas phase reaction of ground state methylidyne radicals (CH) with silane (SiH₄). Exploiting crossed molecular beams experiments augmented by high-level electronic structure calculations, the elementary reaction commenced on the doublet surface through a barrierless insertion of the methylidyne radical into a silicon-hydrogen bond forming the silylmethyl (CH₂SiH₃; X²A′) complex followed by hydrogen migration to the methylsilyl radical (SiH₂CH₃; X²A′). Both silylmethyl and methylsilyl intermediates undergo unimolecular hydrogen loss to silene (H₂SiCH₂; X¹A₁). The exploration of the elementary reaction of methylidyne with silane delivers a unique view at the widely uncharted reaction dynamics and isomerization processes of the carbon–silicon system in the gas phase, which are noticeably different from those of the isovalent carbon system thus contributing to our knowledge on carbon silicon bond couplings at the molecular level.